Climate change will affect the ability of forest management to reduce gaps between current and presettlement forest composition in southeastern Canada

Landscape Ecology - Forest landscapes at the boreal–temperate ecotone have been extensively altered. Reducing the gap between current and presettlement forest conditions through...     

Waterlogging tolerance of pea at germination

Peas (Pisum sativum L.) are exposed to waterlogging at germination when grown as relay in rice‐based cropping. Ninety‐one germplasm accessions were evaluated in relay (sown in waterlogged soil), and subsequently 10 diverse genotypes compared under relay and sole cropping (conventional tillage sowing) over two seasons in Bangladesh. Contrasting genotypes, BM‐3, NL‐2 and Kaspa, were further evaluated in three waterlogging treatments (drained control, 4 and 8 days waterlogging) in the glasshouse. Conspicuous variation in waterlogging tolerance at germination was observed in the field and confirmed under controlled conditions. In relay sowing in 2011, emergence of a few genotypes was affected by waterlogging. In 2012, emergence in relay was severely affected (12 plants/m²) compared to sole sowing (37 plants/m²). Among genotypes BM‐3 had 6 plants/m² emerge, which all subsequently died, in contrast to NL‐2 in which emergence was 13 plants/m² with all plants surviving. In the glasshouse, there was 14% emergence in BM‐3, 40% in NL‐2 and 55% in Kaspa after 8 days of waterlogging. Such marked differences in waterlogging tolerance at germination in the model pea are the first reported and illustrate prospects for selection to improve adaptation to relay sowing in South Asia.     

Responses of carbon metabolism and antioxidant system of summer maize to waterlogging at different stages

A field experiment was performed to explore responses of carbon metabolism, antioxidant system and endogenous hormone content of summer maize hybrids DengHai605 (DH605) and ZhengDan958 (ZD958) to waterlogging at the third leaf stage (V3), the sixth leaf stage (V6) and the 10th day after the tasselling stage (10VT). Results showed that waterlogging significantly decreased the contents of zeatin riboside (ZR), indole‐3‐acetic acid (IAA) and gibberellic acid (GA), compared to those of CK. However, leaf abscisic acid (ABA) content was significantly increased by waterlogging at different stages, with the most significant increase was found in the treatment of waterlogging at V3 (V3‐W), with an increase of 30% and 29% for DH605 and ZD958, respectively. Waterlogging significantly decreased antioxidative enzyme activities, accelerating leaf senescence, resulted in the disorder of leaf gas exchange parameters and chlorophyll fluorescence parameters. In addition, waterlogging decreased key enzyme activities of carbon metabolism (ribulose bisphosphate carboxylase and phosphoenolpyruvate carboxylase), with the most significant reduction in V3‐W, with a decrease of 46% and 49% for DH605, and 53% and 55% for ZD958, respectively. Visibly, waterlogging disturbed carbon metabolism, affected plant endogenous hormone content, accelerated leaf senescence and eventually resulted in a significant reduction in photosynthetic characteristic and grain yield. V3 was most susceptible to waterlogging, followed by V6 and 10VT.     

terraGIS – a web GIS for delivery of digital soil maps in cotton‐growing areas of Australia

Effective management of soil requires the spatial distribution of its various physical, chemical and hydrological properties. This is because properties, for example clay content, determine the ability of soil to hold cations and retain water. However, data acquisition is labour intensive and time‐consuming. To add value to the limited soil data, remote sensing (e.g. airborne gamma‐ray spectrometry) and proximal sensing, such as electromagnetic (EM) induction, are being used as ancillary data. Here, we provide examples of developing Digital Soil Maps (DSM) of soil physical, chemical and hydrological properties, for seven cotton‐growing areas of southeastern Australia, by coupling soil data with remote and proximal sensed ancillary data. A greater challenge is how to get these DSM to a stakeholder in a way that is useful for practical soil use and management. This study describes how we facilitate access to the DSMs, using a simple‐to‐use web GIS platform, called terraGIS. The platform is underpinned by Google Maps API, which is an open‐source development environment for building spatially enabled Internet applications. In conclusion, we consider that terraGIS and the supporting information, available on the sister web page ( http://www.terragis.bees.unsw.edu.au/ ), allow easy access to explanation of DSM of soil properties, which are relevant to cotton growers, farm managers, consultants, extension staff, researchers, state and federal government agency personnel and policy analysts. Future work should be aimed at developing error budget maps to identify where additional soil and/or ancillary data is required to improve the accuracy of the DSMs.     

Potential for mitigating atmospheric ammonia in Canada

Most ammonia (NH₃) emissions (85%) in Canada come from agricultural sources (400 kt/yr). There are international conventions that require countries to mitigate NH₃ emissions but there are no federal or provincial guidelines in Canada stipulating emission targets or best practices for agriculture. This study examines the potential for mitigating atmospheric NH₃ using a range of approaches. Taking current farm practices into account, employing proven low‐cost measures (low‐emission slurry application and slurry storage covers) would reduce annual emissions from livestock operations by 16 kt NH₃‐N, while using all available low‐cost measures would reduce emissions by 79 kt NH₃‐N or 26% of livestock emissions. Another 36 kt/yr could be avoided by improving fertilizer practices, so that the total potential reduction would be about 29% of all agricultural emissions. Emissions from beef cattle and pig production could be reduced by 18% if consumption was cut by 50%, with greater mitigation if production for export was reduced, although the economic and social consequences need to be considered. Mitigation practices must be viewed in the context of possible pollution swapping especially in surplus nitrogen situations. Emissions must also be considered in terms of atmospheric NH₃ transport to and from the USA, therefore bi‐national agreements to jointly reduce emissions might be needed. It may be more cost‐effective in Canada to strategically reduce emissions to minimize risks to health (from particulate matter) and the environment rather than to reduce annual national emission targets.     

The influence of graphene reinforced electrospun nano-interlayers on quasi-static indentation behavior of fiber-reinforced epoxy composites

The aim of this research is to investigate the development and evaluation of hybrid multi-scale aramid/epoxy composites interleaved with electrospun graphene nanoplatelets/nylon 66 (GNPs/PA66) mats. The reinforced nanofiber mats were explored for their best mechanical properties and PA66 nanofibers with 1 wt% GNPs were selected for composite production. Quasi-static indentation tests were performed on both pristine and nanofiber-modified composites. The experimental results revealed that the introduction of reinforced interleaves within the interlaminar interfaces of composites promotes fracture toughness compared to pristine interleaves. It is shown that there is a particular interleaf thickness for optimum toughening effect of nanofibers. The optimum thicknesses for pristine and reinforced interleaves are 35 and 17.5 μm, respectively.     

Influence of crop establishment methods on yield,economics and water productivity of rice cultivars under upland and lowland production ecologies of Eastern Indo-Gangetic Plains

A field study on assessment of crop establishment methods on yield, economics and water productivity of rice cultivars under upland and lowland production ecologies was conducted during wet seasons (June–November) of 2012 and 2013 in Eastern Indo-Gangetic Plains of India. The experiment was laid-out in a split-plot design (SPD) and replicated four times. The main-plot treatments included three crop establishment methods, viz. dry direct-seeded rice (DSR), system of rice intensification (SRI) and puddled transplanted rice (PTR). In sub-plots, five rice cultivars of different groups like aromatic (Improved Pusa Basmati 1 and Pusa Sugandh 5), inbreds (PNR 381 and Pusa 834) and hybrid (Arize 6444) were taken for their evaluations. These two sets of treatments were laid-out simultaneously in two production ecologies, upland and lowland during both years. In general, lowland ecology was found favourable for rice growth and yield and resulted in 13.2% higher grain yield as compared to upland ecology. Rice grown with SRI method produced 19.4 and 7.0% higher grain yield in 2012 and 20.6 and 7.1% higher in 2013, over DSR and PTR. However, PTR yielded 13.1 and 14.5% higher grain over DSR during 2012 and 2013, respectively. On an average, Arize 6444 produced 26.4, 26.9, 28.9 and 54.7% higher grain yield as compared to PS 5, P 834, PNR 381 and IPB1, respectively. Further, the interaction of production ecologies × crop establishment methods revealed that, in upland ecology, SRI recorded significantly higher grain yield as compared to PTR and DSR, but in lowland, grain yield resulting from SRI was similar to the yield obtained with PTR and significantly higher than DSR. The latter two methods (PTR and DSR) yielded alike in lowland ecology in both study years. The production ecologies × crop establishment methods × cultivars interaction on grain yield showed that the growing of Arize 6444 cultivar using SRI method in upland ecology resulted in the higher grain yield (8.87 t/ha). But the cost of production was also highest in SRI followed by PTR and DSR across production ecologies and cultivars. Cultivation of hybrid (Arize 6444) involved higher cost of production than all other cultivars. Irrespective of crop establishment methods and cultivars, gross returns, net returns and B:C ratio were significantly higher in lowland compared to upland ecology. Owing to higher grain yield, SRI method fetched significantly higher gross returns and net returns over PTR and DSR. Average increase in net return with Arize 6444 was 68.8, 41.0, 37.7 and 33.1% over IPB 1, PNR 381, P 834 and PS 5, respectively. There was a saving of 30.7% water in SRI and 19.9% in DSR over PTR under upland ecology. Similarly in lowland ecology, water saving of 30.2% was observed in SRI and 21.2% in DSR over PTR. Due to higher yield and saving on water, SRI returned significantly higher total water productivity (TWP) (5.9 kg/ha-mm) as compared to DSR (3.5 kg/ha-mm) and PTR (3.6 kg/ha-mm) under upland ecology. In lowland ecology, also SRI (6.2 kg/ha-mm) resulted in higher TWP as compared to other two methods. However, DSR gave significantly higher TWP as compared to PTR. Among cultivars, hybrid Arize 6444 recorded the highest TWP in both upland and lowland production ecologies across crop establishment methods. Hence, growing of hybrid Arize 6444 with SRI method can enhance rice productivity and water-use efficiency in lowland and upland production ecologies of Eastern Indo-Gangetic Plains and in other similar regions.     

BMC ecology image competition 2017: the winning images

For the fifth year, BMC Ecology is proud to present the winning images from our annual image competition. The 2017 edition received entries by talented shutterbug-ecologists from across the world, showcasing research that is increasing our understanding of ecosystems worldwide and the beauty and diversity of life on our planet. In this editorial we showcase the winning images, as chosen by our Editorial Board and guest judge Chris Darimont, as well as our selection of highly commended images. Enjoy!     

Nano-calcium carbonate reinforced polypropylene and propylene-ethylene copolymer nanocomposites: Tensile vs. impact behavior

Improvement of both the tensile and impact strength of the same polymeric material has always been a great challenge for the plastic industry. The study focuses on the effect of incorporation of calcium carbonate nanoparticles (0.3 wt% to 15 wt%) into three polypropylene (PP) based matrices viz. PP homopolymer, propylene-ethylene (PP-PE) copolymer and the blend of PP:PP-PE (30:70) to improve their impact behavior without hampering the tensile strength much. A loss in both the tensile and impact properties was observed in PP based nanocomposite. However, PP-PE based nanocomposites showed a significant improvement in impact strength (47 %) at 10 wt% loading with a loss of tensile strength by 22 %. To minimize this loss a blend of PP:PP-PE (30:70) was explored as a matrix. At 10 wt% loading, this matrix showed an improvement of 30 % in impact strength whereas the tensile loss was minimized to 10 %. Further, silane coupling agent which promoted good interfacial adhesion was used for best compositions. The variation of crystalline morphology of the nanocomposites with various formulations was analyzed using differential scanning calorimetry and X-ray diffraction.